志尚儀器股份有限公司-JUSUN INSTRUMENTS CO., LTD.

標準氣體產生器

產品型號:491Flex™
標準氣體產生器
Gas Standards Generator
廠牌:KIN-TEK
供應商:志尚儀器股份有限公司
18324
與我們聯絡

行動條碼QR Code
 行動條碼QR Code
  • 濃度範圍:ppb -1000 ppm (依滲透管不同產生濃度亦不同)
    恆溫室容量: 5/16”直徑SRT或是HRT拋棄式滲透管(最多可容6支)
          一支 LFH 或 ULED 可充填式滲透管
          最大外部長度6英吋
    流量範圍: 250-5000cc/min
    準確度: +/- 1%
    操作溫度:5-150 ℃
    溫度控制精度: 0.1 ℃
    樣品壓力: 40 psig (最大)
    電力:115 VAC, 2A
    尺寸:6”寬x13.5”高x20”深
    重量:30 lbs
     
  • • Operating Modes: standby, zero, span
    • Designed for expandability
    • Flow path designed for maximum flexibility with minimum error
    • Flow path suitable for reactive mixtures – mixture contacts only glass, Teflon® , stainless steel or coated stainless steel
    • Accepts disposable permeation tubes, wafer tubes, diffusion tubes, refillable liquid filled tubes, or prefilled gas fed tubes
    • Accepts up to 8 disposable tubes with maximum 6 inch length overall, 5/16 inch diameter (Trace SourceTM SRT, HRT, and EL tubes)
    • Accepts 1 Trace SourceTM refillable LFH or 57 Series tube
    • High mass oven with electronic PID temperature control
    • Temperature Control Range: 5˚C above ambient to 150˚C
    • Temperature Set Point Resolution: 0.1˚C
    • Temperature Display Resolution: 0.1˚C
    • Standard Flow Range: 0.25 – 5.0 liters per minute
    • Optional Flow Ranges: 0.1 – 0.5, 0.5-10.0 liters per minute
    • Flow Control over the Calibrated Range: ≤ ±1.5% of reading
    • Sample Output Pressure: up to 40 psig
    • Output Concentration Range: sub ppb – 1000 ppm depending on emission rate and dilution flow rate
    • Power Requirements: standard 115VAC, 2A
    • Power Requirements: optional (specify at purchase) 230VAC, 1A
    • Dimensions: 6 inch W. x 13.5 inch H. x 20 inches depth (add 3.5 inch to depth for clearance)
    • Weight approximately 30 lbs.