志尚儀器股份有限公司-JUSUN INSTRUMENTS CO., LTD.

滲透管

產品型號:Permeation Tubes
滲透管
Permeation Tubes
廠牌:KIN-TEK
供應商:志尚儀器股份有限公司
2982
與我們聯絡

行動條碼QR Code
 行動條碼QR Code
  • •KIN-TEK的滲透管有兩種基本類型:一次性及可重覆填充。
    •種類超過500種化合物
  • •Modes of Operation: span only
    •Flow path suitable for reactive gases – mixture contacts only glass, Teflon® and stainless steel (other materials available)
    •Accepts disposable permeation tubes, diffusion tubes, wafer tubes, and prefilled gas fed permeation tubes
    •Accepts up to 8 disposable tubes with maximum 6 inch length x 1/4 inch diameter (KIN-TEK HRT, SRT and EL tubes), or Accepts one of KIN-TEK refillable LFH, or Prefilled 57S
    •High mass oven with electronic PID control
    •Temperature Control Range: 5 °C above ambient from 30 to 150 °C (heat only)
    •Temperature Set Point Resolution: 0.1 °C across control range
    •Temperature Display Resolution: 0.1 °C
    •Standard Flow Range: 0.25-5.0 standard liters per minute
    •Flow Control over Calibrated Range: ≤ ±1.5 % of reading
    •Output Concentration Range: below 1 ppb to over 1000 ppm depending on permeation tube emission rate and dilution flow rate
    •Power Requirements: Standard: 115 VAC, 2 A
    •Power Requirements: Optional (specified at time of purchase): 230 VAC, 1 A
    •Dimensions: 6 inch Width x 5 inch Height x 20 inch Depth (add 3.5 inch to Depth for front panel inlet filter clearance)
    •Weight: Approximately 27 lbs, shipping 44 lbs