志尚儀器股份有限公司-JUSUN INSTRUMENTS CO., LTD.

微電腦滲透管氣體產生器

產品型號:FlexStream™
微電腦滲透管氣體產生器
Gas Standards Generator
廠牌:KIN-TEK
供應商:志尚儀器股份有限公司
10623
與我們聯絡

行動條碼QR Code
 行動條碼QR Code
  •  

    •除了FlexStream ™ Base 之外,尚有五種模組可選擇。
    •FlexStream ™ PM -Auxiliary Permeation Module
    •FlexStream ™ GF/PM -Gas Feed Permeation Module
    •FlexStream ™ SD -Secondary Dilution Module
    •FlexStream ™ HG -Humidification Module
    •FlexStream ™ IM -Interface Module
    •流量範圍     : 250-5000cc/min
    •流量控制     : 質流量流量控制器 (Mass Flow Controller)
    •流量控制    :≤± 1.5%讀數
    •溫度控制     :電子式PID
    •操作溫度     :可自行設定由20-150 ℃
    •濃度範圍     : ppb -1000 ppm (依滲透管不同產生濃度亦不同)
    •恆溫室容量   :
    –1/4” 直徑SRT或是HRT拋棄式滲透管(最多可容8支)
    –一支 LFH 或 ULED 可充填式滲透管
    –最大外部長度6英吋
    •滲透管種類   : SRT/HRT拋棄式滲透管/ LFH/ ULED具NIST Traceable報告
  • •High mass oven with electronic PID control
    •Temperature Control Range: 5 ºC above ambient from 20 to 150 ºC (heat only)
    •Temperature Setpoint Resolution: 0.01 ºC across control range
    •Temperature Display Resolution: 0.01 ºC on front panel touch screen
    •Standard Flow Range: 0.25-5.0 liter per minute
    •Optional Flow Ranges: 0.1-0.5, 0.1-1.0, 0.5-10.0 lpm
    •Flow Control over Calibrated Range: ≤ ±1.5 % of reading
    •Flow Change - 0 to Full Scale: < 10 sec (2 time constants) at ambient pressure
    •Mode Change - Zero at 1 lpm to Span at 1 lpm: < 5 sec (2 time constants) at ambient pressure
    •Output Concentration Range: below 1 ppb to over 1000 ppm depending on emission rate and dilution flow rate
    •Local Interface: color touch screen display with virtual keypad
    •Remote Interfaces: RS-232 and Ethernet
    •Communication Protocol: Modbus RTU
    •Power Req: Standard: 115 VAC, 50/60Hz, 2 A
    •Power Requirements: Optional (specified at time of purchase): 230 VAC, 50/60Hz, 1 A
    •Dimensions: 6 inch Width x 13.5 inch Height x 20 inch Depth (add 3.5 inch to Depth for front panel inlet filter clearance)
    •Weight: Approximately 30 lbs